Case Study – Hydraulic Bleeder Valve Cylinder

Case Study – Hydraulic Bleeder Valve Cylinder

Project Background

Below are Hydraulic Bleeder Valve Cylinders designed and supplied for a Steel Blast Furnace in the far east.  Operating at a pressure of 200 Bar & with a minimum yield pressure of 840bar. Trunnion mounted & designed with ports at each trunnion end, these have an operating temperature range of -5º to 80º C.

The Brief

Physical dimensions 200mm bore x 110mm rod diameter with a 500mm stroke.

Three units were designed, built tested & certified by our plant in Bradford. 

Delivered to original technical specification, on time and to cost.

The Result

Successfully installed & commissioned.

Download Case Study Here

Other Case Studies

Leave a Reply

Close Menu